The post מגבר מנורות Canor Virtus I2 appeared first on ארמה אודיו.

The post מגבר משולב MOON 641 appeared first on ארמה אודיו.

The post LAB 12 – Integre4 MK II appeared first on ארמה אודיו.

The post מגבר סטריאו CANOR AI 2.10 appeared first on ארמה אודיו.

The post מגבר מנורות CANOR AI 1.10 appeared first on ארמה אודיו.

The post מגבר סטריאו CANOR AI 1.20 appeared first on ארמה אודיו.

The post LAB 12 – Integre 4 appeared first on ארמה אודיו.

The Line Magnetic 805iA uses single-ended triode 805 tubes and operate in pure Class A. It delivers 2x48W power. It has 3 unbalanced line inputs, 1 bypass input and 4, 8, 16Ω output groups. The rear-illuminated front panel meter is used to adjust the polarization of the tubes.

The use of high-quality components (Mundorf N-Cap capacitors, ALPS potentiometer) wired in the air for the most part is the guarantee of exemplary reliability. Its power and current capacity allows it to manage a very wide range of speakers. The use of the legendary triode 805 offers a listening to an unusual musicality.

HIGHLIGHTS
– Single ended design
– Class A amplifier
– Point-to-point wiring
– High quality components

TUBES
Input stage: 1x 6SL7 2x 6SN7
Drivers: 2x 300B
Power stage: 2x 805 « single-ended » et Pure Class A

Support des Tubes en stéatite
Hand-made construction with the finest point-to-point wiring
Bias control is accessible on top of the amplifier panel with true ampere meter.
Analog Inputs: 3 line inputs, 1 by-pass input Load impedance: 4/8/16Ω SoftStart and time-delay circuit. (30 seconds)
Specially designed EI transformer for power supply
Two EI output transformers with wide bandwidth are applied
ALPS volume control and Realcap capacitors are applied.

Metal and removable tube guard cage
Infrared Remote control

Tubes Basics                Common Replacements
300B                             600B, 300A, 4300B
6SL7                             6N9P, 6H9C, CV1985, ECC35
6SN7                            6H8C, 6N8P, 5692, CV181, ECC33
805                                805, FU-5

Specifications
Class A amplifier – 2x48W RMS
THD: 1% (1kHz)
Signal/Noise ratio: 87dB (Weighted A)
Fréquence Responsive: (-1.5dB) : 10 – 50.000 Hz
Sensitivity: 300 mV (Built-in Mode)
Input Impedance: 100kΩ
Load impedance for HP to connect: 4/8/16Ω

Connectors
3x Line inputs RCA (pair)
1x Pré-in input
2x Screw terminals compatible with banana plugs

The post Line Magnetic  – LM 805 IA  appeared first on ארמה אודיו.

Press – Magazine Haute-Fidélité N°229 – December 2017 – "les saveurs du réalisme". Read the French article in PDF.
Test bench by hifi-advice.com – View article.

The LM-845 Premium is the result of many years of research on the 845 triode Single ended design. Thanks to its exceptional design and manufacturing quality, it is fast fast becoming the absolute reference in the high end amplifiers world.

With a power output of 2x30W, it can be use with most of the existing reference speakers.

The LM-845 Premium is a combination of two units: One is the amplifier unit and the other is output unit.
The LM-845 Premium uses Shuguang 300B tubes in drivers, the 310A for amplifier and Shuguang 12AX7 in pre-amplification.

There are two user bias controls for 300B and 845 have been used for bias adjustment and two meters has been added to the front plate to allow you to monitor bias with ease. Negative feedback switch is on the front plate that you can choose betweeen two levels of NFB to enjoy the different sound outputs.

The LM-845 Premium uses 8 transformers (power supply, filtering, coupling and output)!

Hightlights

– Single-ended design
– Class A amplifier
– Point-to-point wiring
– High quality components

TUBES
Input stage: 2x 12AX7
Drivers: 2x 300B, 2x 310A
Power stage: 2x 845 « single-ended »

Hand-made construction with the finest point-to-point wiring
Bias control is accessible on top of the amplifier panel with true ampere meter.
SoftStart and time-delay circuit. (30 seconds)
Specially designed EI transformer for power supply
Two EI output transformers with wide bandwidth are applied
ALPS volume control and Realcap capacitors are applied.

Metal and removable tube guard cage
Infrared Remote control

Tubes basics               Common remplacements
12AX7                           12AX7EH, ECC83, E83CC, CV4004, ECC803, 5751
300B                              300A, 4300B
845                                845 A/B/C
310A                              Soviet Union/om12C, WE310A

Specifications
Class A amplifier – 2x30W RMS
THD: 1% (1kHz)
Signal/Noise ratio: 87dB (Pondéré A)
Frequency Response  (-1.5dB): 10 – 50.000 Hz
Sensitivity: 220 mV (Built-in Mode)
Input Impedance: 100kΩ
Load impedance for HP to connect: 4/8/16Ω

Connectors
3x Line inputs RCA (pair)
1x Pré-in input
2x Screw terminals compatible with banana plugs

Included Accessories
2x Fuses
1x Remote control
1x Detachable power cord
1x Dedicated cable used to interconnect main amplifier unit to output unit
1x Manual

Generality
Dimensions (W x H x D): Amplifier unit: 435 x 460 x 456 mm
Dimensions (W x H x D): Output unit: 435 x 160 x 456 mm

Total dimensions: 435 x 620 x 456 mm
Total Weight: 62 Kg

Finish: Black 

The post Line Magnetic  – LM 845 PREMIUM  appeared first on ארמה אודיו.

The LM-150IA uses for its power stage 4x KT150 polarized class AB and delivering a power of 2x100W RMS.

Tubes we choose are Shuguang 12AX7, Shuguang 12AU7, Electro Harmonix 6SN7 and Tung-sol KT150. No matter it is the Pre-stage or power stage of tubes we select and choose the best matching ones to use same unit of amplifier to get the best sound quality out of it.

Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can the LM-150IA as a power amplifier. User bias control has been used for bias adjustement including 2 vu-meters.

Highlights
– High-end design
– Point-to-point wiring
– High quality components
– High power

TUBES
Input stage: 2x 12AX7
Rectifier: 1x 12AU7
Drivers: 2x 6SN7 (Electro Harmonix)
Power stage: 4x KT150 (Tung-sol)

Hand-made construction with the finest point-to-point wiring
Bias control is accessible on top of the amplifier panel with true ampere meter.
Analog Inputs: 3 line inputs, 1 by-pass input
Load impedance: 4/8/16Ω
SoftStart and time-delay circuit. (30 seconds)
Specially designed EI transformer for power supply
Two EI output transformers with wide bandwidth are applied
ALPS volume control and Realcap capacitors are applied.

Metal and removable tube guard cage
Infrared Remote control

Tubes Basics               Common Replacements

12AX7                          12AX7EH, ECC83, E83CC, CV4004, ECC803, 5751
12AU7                          ECC82, 12AU7EH, 5814, 6189, CV4003
6SN7                            6NP8, 6H8C, 6H8M, 6F8G, CV181, QB65, ECC32

Specifications
Class AB amplifier
THD: 1% (1kHz)
Signal/Noise ratio: 87dB (Weighted A)
Frequency response (-1.5dB): 10 – 50.000 Hz
Sensitivity: 220 mV (Mode intégré)
Input impedance: 100kΩ
Load impedance for HP to connect: 4/8/16Ω

Connectors
3x Line inputs RCA (pair)
1x Pré-in input
2x Screw terminals compatible with banana plugs

ncluded Accessories
2x Fuses
1x Remote control
1x Detachable power cord
1x Manual

Generality
Dimensions (L x H x P): 430 x 217 x 355 mm
Weight: 32.5 Kg

Finish: Black 

The post Line Magnetic  – LM 150 IA  appeared first on ארמה אודיו.

The LM-845IA is a quality upgrade of the old LM-518 amplifier. It delivers twenty-two watts per channel. Single ended design, Pure Class A, Integrated Stereo Amplifier with 845 output power tubes. The rear-illuminated front panel meter is used to adjust the polarization of the tubes.

The use of high quality components (Realcap capacitors, ALPS potentiometer) wired in the air for the most part is the guarantee of exemplary reliability. Its transformers output are of EI type, specially disigned for power supply.

Its power and current capacity allows it to manage a very wide range of speakers. The use of the legendary triode 845 offers a listening to an unusual musicality.

Hightlights
– Single ended design
– Class A amplifier
– Point-to-point wiring
– High quality components

TUBES
Input stage: 2x 12AX7
Rectifier: 1x 5AR4
Drivers: 2x 6P3P
Power stage: 2x 845 « single-ended » design and pure class A

Hand-made construction with the finest point-to-point wiring
Bias control is accessible on top of the amplifier panel with true ampere meter.
Analog Inputs: 3 line inputs Load impedance: 4/8/16Ω
SoftStart and time-delay circuit. (30 seconds)
Specially designed EI transformer for power supply
Two EI output transformers with wide bandwidth are applied
ALPS volume control and Realcap capacitors are applied.

Metal and removable tube guard cage Infrared
Remote control

Tubes Basics               Common Remplacements

12AX7                          12AX7EH, ECC83, E83CC, CV4004, ECC803, 5751
12AU7                          ECC82, 12AU7EH, 5814, 6189, CV4003
EL34                             6CA7

Specifications
Class A amplifier – 2x22W RMS
THD: 1% (1kHz)
Signal/Noise ratio: 87dB (Weighted A)
Frequency response  (-1.5dB): 10 – 50.000 Hz
Sensitivity: 220 mV (Built-in Mode)
Input Impedance: 100kΩ
Load impedance for HP to connect: 4/8/16Ω

Connectors
3x Line inputs RCA (pair)
1x Pré-in input
2x Screw terminals compatible with banana plugs

Included Accessories
2x Fuses
1x Remote control
2x Battery AAA
1x Detachable power cord
1x Manual
1x Warranty Card

Generality
Dimensions (L x H x P): 365 x 250 x 340 mm
Weight: 35 Kg

Finish: Black 

The post Line Magnetic  – LM 845 IA  appeared first on ארמה אודיו.

Forty watts per channel, Class AB Integrated Stereo Amplifier with EL34 output power tubes, 12AX7 and 12AU7 input tubes.
Standard with EL34 output tubes. Want to enjoy some other types of power tubes? That is why we have tube selector here.
Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can the LM-34IA as a power amplifier.
Specially designed EI transformers for power supply and two EI output transformers with wide bandwidth are applied. Hand made construction with the finest point-to-point wiring and special audiphiles components has carefull been selected by our designers.
User bias control has been used for bias adjustment and one meter has been added to the top plate to allow you to monitor bias with ease.

Highlights
– Class AB amplifier
– Point-to-point wiring
– High quality components

TUBES
Input stage: 1x 12AX7 – 2x 12AU7
Power stage: 4x EL34

Bias control is accessible on top of the amplifier panel with true ampere meter.
SoftStart and time-delay circuit. (30 seconds)
Specially designed EI transformer for power supply
Two EI output transformers with wide bandwidth are applied
ALPS volume control and Realcap capacitors are applied.

Metal and removable tube guard cage
Infrared Remote control

Specifications
Class AB amplifier – 2x40W RMS
THD: 1% (1kHz)
Signal/Noise ratio: 88dB (Weighted A)
Frequency response (-1.5dB): 10 – 50.000 Hz
Sensitivity: 200 mV (Mode intégré)
Input Impedance: 100kΩ
Load impedance for HP to connect: 4/8Ω

Connectors
3x Line inputs RCA (pair)
1x Pré-in input
2x Screw terminals compatible with banana plugs

The post Line Magnetic  – LM 34 IA  appeared first on ארמה אודיו.

The post מגבר סטריאו משולב MOON 340i X appeared first on ארמה אודיו.

The post מגבר משולב ממיר ופונו סטייג MOON 240I appeared first on ארמה אודיו.

The post מגבר סטריאו משולב MOON 250I V2 appeared first on ארמה אודיו.

The post מגבר סטריאו /ממיר /סטרימר /קדם מגבר / פונו סטייג MOON ACE appeared first on ארמה אודיו.